Our Process

Good to know:

 

Handling & Storage

 

Every effort is made to ensure products are delivered in perfect condition. Customers should check all windows, doors and products are as the order and specification. Any problems should be reported immediately to 05 oinery by email to info@05group.co.uk

If 05 Joinery is not the assigned fitters then it is highly recommended that the windows and doors are fitted soon after delivery. This will prevent any accidental damage which would not be covered under the product guarantee. Handling and storage on-site can have a detrimental effect on the products and lifespan. Protective packaging should be left intact until just prior to installation.

Handling should be kept to a minimum. Each window and door will usually carry a label for identification. Always lift a window by its frame and carry vertically to avoid distortion. Do not lift or carry by open window casements or glazing bars as this can cause damage which will not be covered by the guarantee.

Please note the timber windows and doors must be stored vertically above the ground and spaced to ensure ventilation and avoid condensation. They should be kept under cover in a dry space protected from dust, moisture and damage. Special care should be taken when there are high levels of humidity such as from plastering.

 

Installation

 

The installation of timber windows which are produced by 05 Joinery is a specialist job that should be carried out by a qualified or trained specialist according to industry guidelines and complying with building regulations. If you wish to have timber windows installed please contact 05 Joinery for guidance. Good planning, preparation and organisation will make for trouble free installation.

Externally timber windows and doors provide architectural features as well as weatherproofing. Internally they are the same as wood furniture and should be treated as such. The windows and doors even after fitting should be protected from dust and dirt. High internal humidity can also cause distortion after fitting where there is a lack of ventilation with a lot of moisture such as from plastering.

Should any damage be incurred or bare wood exposed, it should be repaired and sealed immediately. Failure to follow our guidelines may invalidate your Guarantees.